Roborock E4

Routine Maintenance
Main Brush Cover Latch
Main Brush Cover
Main Brush
Main Brush Bearing
Dustbin and Filter
* Clean weekly
1.Open the top cover of the robot, press the Dustbin Latch,
then lift and remove the Dustbin.
2.Remove the Filter and empty the Dustbin.
Main Brush
* Clean weekly
1.Flip the robot over and press the Main Brush Cover
Latch to remove the Main Brush Cover.
2.Remove the Main Brush and clean its bearings.
3.Remove any entangled hair.
4.Reinstall the Main Brush and replace the Main Brush
Cover.
Note:
Replacing the Main Brush every 6-12 months is recommended for proper
cleaning.
16