Roborock Q5 DuoRoller+ - Product Overview

07
Product Overview
A
A1
Robot (Top View)
Press any button to stop the robot during
cleaning or docking.
Note:
A1-1—Vertical Bumper
A1-2—LiDAR Sensor
A1-3—Wall Sensor
A3
Robot (Dustbin Removed)
A3-1—Reset Button
A3-2—Air Inlet
A3-3—Air Outlets
Spot Clean/Child Lock
• Press to spot clean
• Press and hold for 3 seconds to
turn on/off the child lock
A2
Robot (Bottom View)
A2-1—Cliff Sensors
A2-2—Omnidirectional Wheel
A2-3—Charging Contacts
A2-4—Side Brush
A2-5—Main Brushes
A2-6—Main Brush Cover
A2-7—Main Wheels
• White: Battery level ≥ 20%
• Red: Battery level < 20%
• Breathing: Charging or starting up
• Flashing red: Error
Power Indicator
Power/Clean
• Press and hold to turn the robot
on or off
• Press to start cleaning
• Flashing blue slowly: Waiting for
connection
• Flashing blue quickly: Connecting
• Steady blue for five seconds: WiFi
connected
WiFi Indicator Light
Dock
• Press to return to dock/start
emptying
A5
Power Cable
A4
Dustbin
A4-1—Dustbin Latch
A4-2—Washable Filter
A4-3—Air Inlet
A6
Dustbin (Disposable Dust Bag
Pre-Installed)
A7
Dustbin Cover
A8
Disposable Dust Bag
A9
Dock Base
A9-1—Air Duct Cover Screws (10)
A9-2—Air Duct Cover
A9-3—Screwdriver
A9-4—Base Fastening Screws (6)
A10
Auto-Empty Dock
A10-1—Dustbin Cover
A10-2—Dustbin
A10-3—Dock Base
A10-4—Status Indicator Light
• Steady white: Standby
• Flashing white: Emptying
• Steady red: Dock error
• Light off: Charging robot/Not
power on
A11
Auto-Empty Dock (Dustbin
Cover Removed)
A11-1—Dust Bag Slot
A11-2—Filter
A10-5—Dock Location Beacon
A10-6—Charging Contacts
A10-7—Suction Inlet
A10-8—Electrode Brushes
A1-4—Dock Locator
A1-5—Bumper
Note:
Power cable can be pulled out at both sides.
A12
Power Cable Storage
A12-1—Power Cable Storage Slot
A12-2—Cable Outlet
A12-3—Power Port