Need help?Do you have a question about the Robot Coupe CL 50 and is the answer not in the manual?
Carefully remove equipment from packaging and check contents. Be aware of sharp parts.
Install machine on a stable base at a convenient operating height.
Connect to standard 120 Volt 60 Hz grounded outlet. Use GFCI outlet.
Handle blades with care as they are extremely sharp. Avoid overloading the appliance.
Do not override safety systems. Never insert objects or hands into the container during operation.
Always unplug before cleaning. Clean appliance and attachments after each cycle. Do not immerse motor unit.
Unplug before opening housing. Check seals and safety devices regularly. Contact service if issues arise.
Read manual before operating. Check power supply matches machine's identification plate.
Instructions for assembling CL 51, CL 50/CL 50 Ultra/CL 51 models, including disc and grid placement.
Tips for using the large hopper, including pusher technique and cabbage preparation for optimal results.
General| Power | 550 Watts |
|---|---|
| Speed | 425 rpm |
| Motor | Induction Motor |
| Material | Stainless steel |
| Frequency | 50/60 Hz |
To Next Page