ROBOT3T- 3C MACHINERY CO., LTD
6/4, 328 Cao Lo Street, Ward 4, District 8, Hochiminh City, Vietnam
Email: sales@robot3t.com
(+84) 97-490-8615
USER MANUAL THC3T-02 STEP/DIR Page 6 | 16
3.2 Arc-voltage
When connecting directly, use the shortest possible cables for connecting the
plasma cutter with THC controller - it is recommended the THC controller to be mounted
directly at the plasma cutter.
Fig5. Power Supply
24-36V DC
GND