ROBOT3T THC3T-02 Operating Manual

ROBOT3T- 3C MACHINERY CO., LTD
6/4, 328 Cao Lo Street, Ward 4, District 8, Hochiminh City, Vietnam
Email: sales@robot3t.com
(+84) 97-490-8615
USER MANUAL THC3T-02 STEP/DIR Page 15 | 16
5. Fault processing
No.
Code
Name
Causes
Countermeasures
1
Error.1
Power fault
-The THC is broken;
-The power is not
connected;
-The line of power supply
is broken;
-Replace the THC;
-Connect the power
supply;
-Check that the power
line are wired correctly;
-Replace the power cable
2
Error.2
Step/dir
fault
-The power of breakout
board and drive Z are not
connected;
-The line of step/dir from
breakout board to THC is
broken or not connected;
-The line of step/dir from
THC to drive is broken or
not connected;
-Configuration on
MACH3 is not corrected;
-The breakout board or
drive-Z are broken;
-The THC is broken;
-Check that the power
line are wired correctly;
-Check that the step/dir
line are wired correctly or
replace;
-Check that the step/dir
line are wired correctly or
replace;
-Check that configuration
on MACH3;
-Replace breakout board
or drive-Z;
-Replace the THC.
3
Error.3
Arc-voltage
fault
-The power of plasma
cutter is not connected;
-The line of arc-voltage
from divider board to
THC is broken or not
connected;
- The THC is broken;
-Connect the power
supply;
-Check that the step/dir
line are wired correctly or
replace;
-Replace the THC.

ROBOT3T THC3T-02 Specifications

General

Brand	ROBOT3T
Model	THC3T-02
Category	Controller
Language	English