ROBOTOUS RFT Series - Caution; Notices; Warning

RFTSeries|6AxisForceTorqueSensor

©ROBOTOUSCo.,Ltd.www.robotous.com|support@robotous.com
4
1. Caution
1.1. Notices
The user must read and understand all of the instructions in this manual before using the RFT series F/T
sensors.
This manual covers installation, operation, specification, and ordering information of RFT series F/T
sensors..
1.2. Warning
Do not install and operate a F/T sensor that is damaged or lacking some parts.
Do not disassemble or repair the sensor for any purpose. This may cause irreparable damage to the
sensor and void the warranty.
Always take payload applied to the F/T sensor into consideration for safe usage.
Do not exert excessive forces or torques on the sensor. This can create incorrect measurement and
cause damage to the sensor. When force is applied to the sensor, torque is exerted on the sensor
simultaneously. Make sure all components of force and torque stay within allowed ranges. Even if a
component of them exceeds its limit, this may result in incorrect measurement of the other component.
Refer to Section 4.1 Performance Specifications
.
If the sensor experiences a sudden change in temperature and humidity, the sensor’s temperature
correction feature may no longer function correctly and cause erratic sensor output. Please ensure the
sensor is not subject to sudden changes in temperature and humidity.
Do not remove or damage the label on sensor to maintain warranty.