Robur Direct Digital Controller User Manual

Direct Digital Controller
48 Direct Digital Controller fw 4.013 – Ed. 01/2013
3.4.2 PREFERENCES
From the user settings menu, select “Preferences” to access the drop-
down menu where it is possible to set the following parameters:
3.4.2.1 Language
3.4.2.2 Date and Time
3.4.2.3 Temperature Measurement Unit
3.4.2.4 Alarm Beeper
3.4.2.5 Display Options
3.4.2.6 User Password Setup
3.4.2.1 Language
The following languages are available for viewing the indications on the
display: Italian, English, French, German, Spanish.
Select “Exit” to return to the list of preferences.
If a language is selected by mistake, wait for 30 minutes until the DDC returns automatically to the main
screen, then proceed as follows:
1 - Select
from the initial screen to gain access to the main menu.
2 - Select
to access the “User settings” menu.
3 - Position the cursor by turning the knob on the second line of the drop-down menu, and press the knob.
4 - A second drop-down menu appears. Simply select the first line by pressing the knob.
5 - Turn the knob to choose the language and press the knob to confirm the choice.
6 - Wait for the change to the language selected.
7 - To exit, select
.
3.4.2.2 Date and Time
In this screen, current time and date may be modified.
Setting current date and time
1 - Select
from the initial screen to gain access to the main menu.
2 - Select
to access the “User settings” menu.
3 - If requested, enter the user password on the numerical keypad that appears on the display.
4 - Select “Preferences” from the drop-down menu.
5 - Turn the knob to scroll the cursor downwards until “Date and time” is highlighted and press the knob to
access the submenu.
6 - To modify the date and/or time, turn the knob to position the cursor on the value to be modified.

Robur Direct Digital Controller Specifications

General

Brand	Robur
Model	Direct Digital Controller
Category	Controller
Language	English