Robustel GoRugged R3000 Wireline - 4 Ethernet Ports User Guide
RT_UG_R3000 Wireline- 4 Ethernet Ports _v.1.1.0 02.07.2015 78 / 116
Confidential
Tick to enable PPTP server.
Set the username which will assign to PPTP client.
Set the password which will assign to PPTP client.
Select from “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
PPTP client need to select the same authentication method based on this
server’s authentication method.
Set the IP address of PPTP server.
Set the IP pool start IP address which will assign to the PPTP clients.
Set the IP pool end IP address which will assign to the PPTP clients.
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a protocol for
encrypting data across PPP and VPN links.
Show PPTP Server
Advanced
Tick to show the PPTP server advanced setting.
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default.
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default.
One of the PPTP initialization strings. In general, you don’t need to modify
this value.
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
To Next Page