Robustel GoRugged R3000 Wireline - Configuration -> Syslog; Configuration -> Event

Robustel GoRugged R3000 Wireline - 4 Ethernet Ports User Guide
RT_UG_R3000 Wireline- 4 Ethernet Ports _v.1.1.0 02.07.2015 84 / 116
Confidential
Password, Device
Name, Device ID (S),
KeepAlive
Cumulosity. Default settings will be ok. After settings are activated, R3000 will
update information to Cumulosity automatically.
GpsGate@Portal
GpsGate
Connect to GpsGate portal. You should configure the GpsGPS Setting at first.
3.30 Configuration -> Syslog
This section allows users to set the syslog parameters.
Syslog
Item
Description
Default
Save Position
Select the save position from “None”, “Flash” and “SD”. “None” means syslog is
only saved in RAM, and will be cleared after reboot.
NONE
Log Level
Select form “DEBUG”, “INFO”, “NOTICE”, “WARNING”, “ERR”, “CRIT”, “ALERT”
and “EMERG” which from low to high. The lower level will output more syslog in
detail.
DEBUG
Keep Days
Specify the syslog keep days for router to clear the old syslog.
14
Log to Remote System
Enable to allow router sending syslog to the remote syslog server. You need to
enter the IP and Port of the syslog server.
Disable
3.31 Configuration -> Event
This section allows users to set the Event parameters.