What to do if the lights blink 3 times every 5 seconds on my Roca toilet?
If the lights blink 3 times every 5 seconds on your Roca toilet, it indicates no signal in the presence sensor (ToF), which is likely due to dirt on the presence sensor. Clean the presence sensor.
What to do if the lights blink 4 times every 5 seconds on my Roca toilet?
If the lights blink 4 times every 5 seconds on your Roca toilet, it indicates water overheat, which is caused by a failure in the hydraulic and/or heater circuit. Decalcify.
What to do if the lights blink 10 times every 5 seconds on my Roca toilet?
If the lights blink 10 times every 5 seconds on your Roca toilet, it indicates a failure in the toilet flush mechanism. This is often due to abnormal motor behavior from the flush mechanism. Press the complete flush button on the auxiliary side control for 5 seconds to unlock it.
What to do if water still flowing from the ring after a Roca toilet flush?
If water continues to flow from the ring after a flush in your Roca toilet, the filling solenoid may not be closing properly. Close the stopcock and call Technical service. It is recommended to not performed any flush.
What to do if water remains and level grow up after a Roca toilet flush?
If water remains and the level rises after a flush in your Roca toilet, the toilet outlet is likely clogged, preventing proper evacuation. Use a plunger or similar tool to clear the clog. It is recommended to not performed any flush.
Why is the cleaning water not warm on my Roca toilet?
If the cleaning water on your Roca toilet isn't warm, the water is likely adjusted to room temperature. Increase the temperature using the remote control.
General warnings and precautions for safe product usage.
General safety advice including packaging and usage.
Precautions to be taken during the installation process.
Important safety measures for operating the product.
Safety guidelines for maintaining the product.
Recommended environmental conditions for product operation.
Details of the components included with the product.
Steps to follow for initial product setup and activation.
How to use the product after initial setup.
Overview of product functions controllable via the remote.
How to use the perineal wash function.
How to use the anal wash function.
How to activate and use the odor absorption feature.
Different modes for anal washing.
How to use the drying function after washing.
How to stop current washing and drying operations.
Details on different flushing modes available.
How to open and close the seat and lid, including auto functions.
Adjusting product settings using the remote control.
How to adjust water and air temperature settings.
How to adjust water and air pressure settings.
How to adjust the nozzle position.
Using the auxiliary side control for functions.
Using the auxiliary side control for anal cleaning.
Using the auxiliary side control for drying.
Using the auxiliary side control to stop functions.
Using auxiliary side control for flushing.
Performing hygienic flush via side control.
Adjusting the heated seat temperature.
Modifying pre-set product settings.
Personalizing cleaning and drying settings.
Different modes for LED lights operation.
Activating silence mode for reduced sound.
Instructions for general cleaning of the product and remote.
How to activate cleaning mode for easier cleaning.
Procedure for cleaning the nozzle and replacing the tip.
Steps for performing the automatic descaling process.
How to clean the device's filter.
Procedure for changing batteries in the remote control.
Recommendations for prolonged periods of non-use.
Instructions for disassembling and reassembling the seat and cover.
How to fill the cleaning agent tank.
How to replace the deodorizer filter.
Detailed technical specifications and features of the product.
To Next Page
General
