How to fix a Roca Toilet that is not working?
If your Roca Toilet is not working, there are several potential causes: * It might not be connected to the main power supply, so ensure that it is properly connected. * There might be no electrical power supply. Check if there’s a 220-240V~,50/60Hz signal using another product, such as a hairdryer. * The product might be powered off. Try pushing the power button (on/off side control).
Why is there low water flow or pressure in my Roca Toilet?
Low water flow or pressure in your Roca Toilet can be due to several reasons. It could be a clogged filter, a twisted hose, or a stuck nozzle cap. You can try to straighten the hose.
What to do if my Roca Toilet shuts off during use?
If your Roca Toilet shuts off during use, it might be due to two reasons: either the washing time has exceeded 5 minutes, in which case you should repeat the cleaning function, or there has been a power failure. To resolve the latter, check the power supply or unplug the power cord to reset the toilet.
Why is the oscillating function LED blinking on my Roca Toilet?
If the oscillating function LED is blinking on your Roca Toilet, it could be due to a lack of water in the tank. Try cleaning the water filter. Also, validate that the water inlet flow and pressure are sufficient. If the problem persists, unplug the product, wait 20 seconds, and then reconnect it to the power supply.
How to increase water pressure in my Roca Toilet?
If you're experiencing low water flow or pressure in your Roca Toilet, it could be due to a clogged filter. Another possible cause is a twisted hose, which you should straighten. Also, the nozzle cap might be stuck; ensure it is clean.
What to do if washing feature does not work on Roca Toilets?
If the washing feature on your Roca Toilet does not work or fails to spray, make sure you are properly seated. Adjust your sitting position on the toilet.
Why is the dryer not working on my Roca Toilet?
If the dryer on your Roca Toilet is not working, it might be because the dryer only operates when the seat is activated. Make sure you are sitting on the product to operate the dryer.
Why does my Roca Toilet shut off during use?
Your Roca Toilet might shut off during use because the washing time has exceeded 5 minutes, so you should repeat the cleaning function. Another possible reason is a power failure. In this case, check the power or unplug the power cord to reset the toilet.
General| Color | White |
|---|---|
| Water Connection | 1/2 inch |
| Flushing System | Washdown |
| Features | Heated seat, Remote control |
| Flush System | Washdown |
Warnings to prevent electric shock from product misuse, including remote control placement and liquid contact.
Precautions for safe product use, including child supervision, intended use, and handling of damaged cords.
Requirements for proper grounding, outlet specifications, RCD installation, and extension cord usage.
Guidance on installation zones for the electric toilet and wall socket, and water jet exposure warning.
Instructions for responsible disposal of the product in the EU, emphasizing recycling and environmental protection.
Warnings regarding plug connection, multiple outlets, wet hands, and power cord handling to prevent fire or shock.
Instructions on cleaning, disassembly, avoiding physical stress, water usage, and placing objects on the product.
Labels the main physical parts of the toilet unit, including the lid, seat, nozzle, and body housing.
Details the buttons and indicators on the side control panel for operation, including cleaning and drying modes.
How to activate, stop, and adjust settings like nozzle position, water pressure, and massage for cleaning.
Details the 5-level adjustment for the nozzle's stretching length during cleaning operations.
Explains how to set the water temperature across four levels: Off, Low, Medium, and High.
How to adjust water pressure and activate oscillating/pulsating cleaning modes for enhanced cleaning.
Instructions for using the dryer function and adjusting its temperature across three levels.
How to enable or disable the beeping sound for quieter operation by holding the temperature button.
Procedures for cleaning the nozzle and extending it automatically for a set duration.
Precautions against aggressive cleaning products, manual nozzle handling, or direct manual removal.
Detailed steps for removing, cleaning, and reinstalling the water filter to remove clogs.
Step-by-step instructions for safely detaching the main unit from the mounting plate and draining water.
Advice on avoiding force, disconnecting power during storms, and disconnecting water hoses during maintenance.
Solutions for issues like no power, low water flow or pressure, and nozzle blockages.
Troubleshooting for washing features not working, product shutting off, or dryer issues.
Solutions for blinking indicator lights related to water temperature, oscillating, pulsating, or power errors.
To Next Page
