English
10
a
b
Cleaning and removal
Use a soft and damp cloth or sponge to wipe off the body gently.
Disconnect the power
1. Unplug the product prior to clean.
2. Push the release button located on the back right of the seat and slide out main unit from mounting plate.
Warning!
1. Do not scrub or use harsh or abrasive chemical cleansers to clean the product. Only use neutral product for cleaning.
2. For a thorough cleaning, you may need to detach the product.
3. Do not damage bidet hose, power cord, ground wire during the removal.
Precautions
1. Do not force any of the parts of the product.
2. In case of storm, disconnect the product from the power supply.
3. In case of house water pipe maintenance, please disconnect the water hose till all pipes get clean.
Note:
Protect the product to get hit or scratch. Uninstall mounting plate and screws and keep them together with the product.
Complete detachment
If you plan not use the product for a long period, please remove the product from the toilet.
1.
Press and hold button for 3 seconds
to shut off the product.
2.
Unplug the power cord from the wall
outlet.
3.
Shut off the water supply.
Disconnect the t-valve and bidet hose.
4.
Push the release button located on the
back right of the seat and slide out main
unit from mounting plate.
5.
Unscrew the drain lever using a coin
to open cover.
Note: When the water tank still has water
in it, do not flip, or skew the product.
6.
Drain water from reservoir.
To Next Page
Loading...
Need help?
General
