English
5
Parts list
Specification
User’s manual Installation guide Guarantee card
Mounting plate with
hardware kits
T-valve with bidet hose
Power source 220-240V~, 50/60Hz
Maximum power consumption 1300W
Tap water pressure (connect to cold water)
0.1~0.7 MPa (1~7bar)
Rear spray volume 0.2~0.8 L/min
Front spray volume 0.2~0.8 L/min
Maximum heater capacity 1200W
Heating system Instant water heating
Water temperature Off / 35°C / 37 °C / 39°C
Safety device Thermal fuse
Warm dryer temperature 40~60 °C
Maximum heater capacity 350W
Air dryer speed 12 m/s
Safety device Thermal fuse
Length of power cord 120cm
Product weight 3.7kg (±0.3kg)
Above specifications has been measured under room temperature of 25°C, incoming water temperature between 15°C and
30°C and Water pressure of 0.2MPa. Incoming water temperature out of this range can cause unstable temperature of the water
coming out through the nozzle.
Themanufacturer reserves the rightto change above specifications at any time without notice and without incurring obligations.
Rear & front cleansingDryer
To Next Page
Loading...
Need help?
General
