English
7
Clean function
Please occupy the toilet seat in order to activated the sensor installed onto the seat.
Rear cleaning
Front cleaning
Rear and front cleaning setting adjustment
While rear or front clean function activated below parameter can be adjusted: nozzle postition, water temperature, water pressure,
cleaning massage.
Water temperature
Nozzle position
Note: Both rear and front cleaning function can’t working at the same time.
Cleaning function will stop automatically in 5 min. Please press again to resume the function.
1. Cleaning
Press rear cleaning button to activate.
1. Cleaning
Press front cleaning button to activate.
Water temperature adjustment
Press temperature button repeatedly to adjust water
temperature. There are 4 temperature levels.
2. Stop cleaning
Press stop button.
2. Stop cleaning
Press stop button.
Off Low Medium High
Nozzle position adjustment
Press
or button to adjust the stretching length of nozzle. There 5-level adjustment.
To Next Page
Loading...
Need help?
General
