2013 年 11 月 01 日
External input arming:When it is selected ,can alarm through the input
signal of the GPIO external linkage equipments, also be called Linkage
box alarm.
A complete alarm triggered task requires the following factors:
1) Triggering conditions
2) Triggering time
3) The action after triggered.
Such as set motion detection arming:
The first is the trigger condition ,and where the“Motion Detection
Arming”need be selected.
Motion detection sensitivity can be adjusted according to Testing
environment.
Select the trigger time
Fifteen minutes of a cell, set according to your own need.
Select the action after the trigger.
Recommendation: Select the mail alarm notifications and be sure selected
To Next Page
Loading...