Roche Accu-Chek Guide - Quick Start Guide Manual

Wireless connectivity
Display Test strip
Buttons
Strip
ejector button
Lighted strip port
Testing blood glucose
Always wash your hands
with warm, soapy water
and dry them thoroughly
before beginning a test.
Remove a test strip from
the spill-resistant container.
Close the cap tightly.
Insert the metallic end of the
test strip into the meter.
Touch the yellow edge of
the test strip to the blood
drop. Remove your finger
from the test strip when
“Analyzing” appears on
the display.
The test result appears on
the display in less than 4
seconds.