J
Jody RamosJul 27, 2025
How to check code on Roche Accu-Chek Active?
- EEmily CarlsonJul 27, 2025
Verify that the code displayed on the meter matches the code printed on the test strip container. If these codes do not match, recode the meter.
To Next PageTo Next PageHow to check code on Roche Accu-Chek Active?
Verify that the code displayed on the meter matches the code printed on the test strip container. If these codes do not match, recode the meter.
What to do if I am not sure that I followed all the testing steps for Roche Accu-Chek Active?
If you encounter issues, carefully review the testing steps. Refer back to the instructions on running a control test and understanding the results, then test again. If problems persist, seek guidance from your healthcare provider.
What to do if the caps were not tight on Roche Blood Glucose Meter test strips?
Ensure that the caps on both the test strip container and control solution bottles are tightly closed. If either has been open for an extended period, it's best to replace the test strips or control solution to ensure accurate results.
What to do if none of the solutions apply to my Roche Accu-Chek Active problem?
Repeat the control test using a new test strip. If the result remains outside the acceptable range, contact ACCU-CHEK Customer Care Service Center at 1-800-858-8072.
General| Brand | Roche |
|---|---|
| Model | Accu-Chek Active |
| Category | Blood Glucose Meter |
| Language | English |
Meanings of symbols on packaging and meter type plate.
Specifies the purpose and limitations of the Accu-Chek Active blood glucose meter.
Guidance on how to read and understand the user manual and its examples.
Identifies and describes the parts of the Accu-Chek Active blood glucose meter.
Explains the functions of the M and S buttons on the blood glucose meter.
Instructions for checking the contents of the meter package.
Step-by-step guide for inserting and verifying the code chip into the meter.
Steps to power on the meter and access its settings.
Guide to selecting time format and setting the date components.
Essential items and actions needed before conducting a blood glucose test.
How to activate the meter and insert a test strip to begin a test.
Method for applying blood to the test strip while it is inserted in the meter.
Method for applying blood to the test strip after removing it from the meter.
Crucial instructions and precautions for accurate blood glucose testing.
How to assign markers to test results to categorize them (e.g., before/after meal).
Checklist to identify causes of inaccurate or unexpected blood glucose readings.
Retrieving previously saved blood glucose test results from the meter's memory.
Calculating and viewing average blood glucose levels over different periods.
Steps to link the meter to a computer using a USB cable.
Items and steps required to perform a control solution test.
Step-by-step guide to conduct a control test using control solutions.
Checklist for identifying reasons behind inaccurate control test results.
How to clean the outer case, display, and test strip guide.
Step-by-step guide for replacing the meter's battery.
Special considerations and safety instructions for professional use.
Specifies the temperature range for testing and storage.
How light and electromagnetic fields affect meter performance and cause errors.
Explains common symbols found on the meter's display.
Common issues with the meter and their corresponding causes and solutions.
Lists error messages and provides causes and solutions for each.
Proper procedures for disposing of the used blood glucose meter.
Details on meter type, test principle, power, memory, etc.
Guidance on contacting customer support for operational or technical issues.
