Roche Accu-Chek Active User Manual

35
6
Analysing test results on the PC
Analysing test results on the PC
The meter has a built‑in USB (Universal Serial Bus) port for transferring saved test results to a computer
(PC) that is equipped accordingly. Roche Diagnostics oers a variety of special diabetes management
hardware and software products which enhance the integrated diary functions of your meter. With these
hardware and software products, you and your healthcare professional can manage your test results
more eectively and use graphs and tables to understand them better. For further information on diabetes
management products, please contact your customer support and service centre.
USB cable 1
The USB port
1
is located on
the left side of the meter.
To connect the meter to the
computer, you need a maximum
1.5 m long USB cable with a
Micro B connector and a USB‑A
connector. Plug the Micro B
connector
2
into the USB port
of your meter. Plug the USB‑A
connector
3
into a USB port of
your computer.
Plug the Micro B connector into
the USB port of your meter.
Plug the USB‑A connector into a
USB port of your computer.
1
2
3
USB port
man_06658768001_02_EN.indb 35 14.08.2013 10:19:32

Roche Accu-Chek Active Specifications

General

Brand	Roche
Model	Accu-Chek Active
Category	Blood Glucose Meter
Language	English