To Next PageTo Next PageHow to resolve an electronic error on my Roche Accu-Chek Instant?
To resolve an electronic error on your Roche Blood Glucose Meter, remove the batteries, press and hold for a few seconds, and then reinsert the batteries. After doing this, perform a blood glucose or control test.
What to do if my Roche Accu-Chek Instant says my blood glucose is too high?
If your Roche Blood Glucose Meter indicates that your blood glucose may be higher than the measuring range of the system, contact your healthcare professional.
What does it mean when my Roche Accu-Chek Instant Blood Glucose Meter displays an electronic error?
If your Roche Blood Glucose Meter displays an electronic error, contact Roche.
Why won't my Roche Accu-Chek Instant Blood Glucose Meter turn on?
Your Roche Blood Glucose Meter might not be turning on because the batteries are dead. Try inserting new batteries. It could also be due to extreme temperatures; move the meter to a location with a more moderate temperature. If the display is damaged or the meter is defective, contact Roche.
How to fix pairing issues with my Roche Accu-Chek Instant?
If your Roche Blood Glucose Meter won't pair with a mobile device, the batteries might be low. Change the batteries. If the problem continues after replacing the batteries, remove the batteries again, press and hold either meter button for at least 2 seconds, then put the batteries back in. You can also retry the pairing. Also, the test strip may be damaged, not properly inserted, or was previously used. Remove and reinsert the test strip, or replace it if damaged or previously used.
What to do if I can't perform a test on my Roche Accu-Chek Instant Blood Glucose Meter while it's connected to a PC?
If your Roche Blood Glucose Meter is connected to a PC and you can't perform a blood glucose or control test, either remove the USB cable and perform a blood glucose or control test, or remove the test strip and start a data transfer.
What should I do if there's fluid in the test strip slot of my Roche Accu-Chek Instant Blood Glucose Meter?
If there is fluid or foreign material in the test strip slot of your Roche Blood Glucose Meter, remove and reinsert the test strip, or repeat the blood glucose or control test with a new test strip.
What does it mean when my Roche Accu-Chek Instant shows a temperature error?
If your Roche Blood Glucose Meter shows a temperature error, refer to the test strip package insert for system operating conditions. Move to an area with the appropriate conditions and repeat the blood glucose test.
General| Brand | Roche |
|---|---|
| Model | Accu-Chek Instant |
| Category | Blood Glucose Meter |
| Language | English |
Overview of the Accu-Chek Instant System for blood glucose measurement.
Explains the significance of regular blood glucose testing for diabetes management.
Key advice and considerations for using the new blood glucose meter.
Details the various parts and features of the Accu-Chek Instant meter.
Explains the functions of the Up and Down buttons on the meter.
Describes the target range function and its settings for blood glucose monitoring.
Explains the meaning of various symbols displayed on the meter.
Step-by-step guide on how to set the time and date on the meter.
Instructions for using the Accu-Chek Instant system for blood glucose testing.
Step-by-step guide for performing a blood glucose test using fingertip blood.
Guidelines for performing blood glucose tests using alternative body sites.
Provides steps to resolve issues with unexpected blood glucose readings.
Describes symptoms associated with low and high blood glucose levels.
Outlines the conditions requiring a control test for meter accuracy.
Information on the proper use and handling of control solutions.
Step-by-step instructions for conducting a control test on the meter.
Guidance on interpreting and resolving control test results that fall outside the expected range.
Information on the meter's capacity for storing blood glucose and control results.
Instructions on how to access and view stored blood glucose test results.
How to view and understand the calculated 7, 14, 30, and 90-day blood glucose averages.
Introduction to connecting the meter wirelessly to a mobile device.
Steps for pairing the meter with a mobile device via Bluetooth.
Instructions on how to turn Bluetooth on and off on the meter.
Guide on how to connect the meter to a computer using a USB cable for data transfer.
Instructions for replacing the batteries in the Accu-Chek Instant meter.
How to verify all segments of the meter display are functioning correctly.
Guidelines for cleaning and disinfecting the meter to ensure optimal performance.
Explains various error codes and messages displayed by the meter and their solutions.
Details on product limitations, specifications, and operating conditions.
Information on the meter's electromagnetic compatibility and product safety precautions.
Covers conformity declarations, communication protocols, and safety information.
Defines various symbols used on the meter and its packaging.
Lists additional supplies and provides information for healthcare professionals.
Instructions on how to use the Accu-Chek FastClix finger pricker.
Step-by-step guide for loading a lancet drum into the finger pricker.
Instructions for collecting a blood sample from the fingertip using the pricker.
Instructions for collecting blood samples from alternative sites.
Guidance on caring for the puncture site and replacing the lancet drum.
Instructions for cleaning and disinfecting the finger pricker.
Information on where to get assistance and contact details for questions.
Information regarding the statutory provisions on consumer goods sales rights.
