Roche ACCU-CHEK - Meter and Lancing Device Cleaning and Disinfecting; Cleaning vs. Disinfecting Definitions; Approved Cleaning and Disinfecting Product

39
Wireless Communication, Meter Pairing, and Data Transfer
6
Transferring Data Using a USB Cable
This feature allows you to transfer data from your meter to special software for diabetes management on
a PC using a USB cable.
Plug the small end of the
USB cable into the meter.
1
Plug the large end of the USB
cable into a USB port on the PC.
If the meter is o, it turns on.
2
Start the diabetes
management software on
the PC and initiate a data
transfer.
3
The meter transfers the data
to the software.
4
NOTE
The USB cable does not charge the meter’s batteries. Remove the
USB cable after you have finished.
81265_08500142002_EN_Insides.indb 39 10/28/2019 1:55:03 PM