2.
14 15
Procedure for setting time and date
Switch the Accutrend
®
GC on using the ON/OFF button
●
C and wait until the function test is complete.
Open flap
●
D .
seT
appears on the display
●
A .
Briefly press the SET button
●
K below the clock symbol
, using a ballpoint pen, for example. Time and date
begin to flash in the display.
To change the display from the 24-hour to the 12-hour
clock format gently lift up the flap
●
D and press the
rocker button
MEM
●
B . AM or PM appears on the
display.
To Next Page
Loading...