2.
16 17
Press the SET button briefly. The hours flash on the
display.
Keep pressing
MEM
●
B until the desired hour is
displayed.
Press the SET button briefly. The minutes flash on the
display.
Keep pressing
MEM
to set the minutes in the same
way as the hour.
Press the SET button briefly. The day flashes on the
display.
Keep pressing
MEM
to set the day in the same way
as the hour.
Press the SET button briefly. The month flashes on the
display.
Keep pressing
MEM
to set the month in the same
way as the hour.
Store the changes by closing flap
●
D or by pressing
the ON/OFF button
●
C . Your settings will be stored
automatically.
Leap year
In a leap year the date will not change automatically from
28.02 to 29.02 but to 01.03. In order to change the date,
proceed as described above.
The date will then change automatically from 29.02 to 01.03.
To Next Page
Loading...