General Overview
29
A
A
4 Socket for power cable
This is the plug-in for the power cable. There are two power cables included in the
instrument package, one for US and one for German wall outlets.
5 Fuse
Next to the power inlet is a socket for the 2 main fuses. In case the fuses need to be
replaced, make sure to first unplug the instrument from electrical power. A set of spare
fuses is enclosed with the instrument.
6 Barcode Scanner port
The PS/2 port marked „Barcode Scanner“ is to be used for the barcode scanner.
7 Parallel Port
The parallel port is intended to be used for the connection with a local printer.
8 Serial Port (RS232)
The serial port might be used for additional external devices for LIMS.
9 USB Ports
There are two USB ports, USB 1 and USB 2 port, can be used for any accessories that are
not included with the MagNA Pure Compact Instrument.
Description of Left Side of Instrument
1 Air Inlet
Air Inlet for the processing area with dust filter. Dust filters keep dust particles away from
the inside of the instrument. Air is expelled by a fan through the HEPA filter on the back-
side of the instrument.
Description of the Instrument
Description of the Instrument
MagNA Pure Compact Manual.book Seite 29 Dienstag, 28. Februar 2006 4:16 16
To Next Page
Loading...