General Overview
31
A
A
3 Elution Tube Rack
The Tube Rack also contains a separate rack for elution tubes. The Elution Tube Rack will
sit on the tube rack, after both have been equipped. The two holes of the Elution Tube
Rack match with the two pins of the tube rack. After assembly the elution tube rack hides
the row for primary sample tubes. The elution tube rack holds up to 8 tubes (capacity 2.0
ml), each labelled with an individual barcode. These tubes are provided with the reagent
kits. The rack has numbered positions (1-8) and can stand upright on e.g. a bench.
4 Drip Tray
The Drip Tray keeps any accidentally spilled liquid away from the interior of the instru-
ment housing, especially from the electrical components of the instrument which are
located below the Processing Stage. It can be removed for cleaning. (For details see the
Maintenance section in chapter C.) See chapter C for details on cleaning the drip tray.
Description of the Instrument
Description of the Instrument
MagNA Pure Compact Manual.book Seite 31 Dienstag, 28. Februar 2006 4:16 16
To Next Page
Loading...