20 Rocket Model 204 Terminal User’s Guide
Terminal dialog
This chapter is intended to serve as an introduction to Model 204 remote
terminal facilities, not to describe User Language or system control commands
in any detail. For more information about these facilities, refer to the Model 204
User Language Manual and the Model 204 Parameter and Command
Reference Manual.
The terminal used in this session is a Teletype-compatible device that connects
to Model 204 by means of a dialup telephone line and an acoustical coupler.
Refer to Chapter 4 for a discussion of this device.
The prompt character shown in this session is a question mark (?). The
particular prompt that appears on a user’s terminal can differ, depending on
terminal type and the Model 204 system interface used.
Terminal dialog
The entire terminal session is shown on the next four pages. The remainder of
this chapter describes the components of the session in detail.
After the user connects to Model 204 using the Teletype device (as described
in “Getting online” on page 23), Model 204 displays the following message to
indicate it is ready for the user to initiate a session:
MODEL 204
Logging in
The user logs in to Model 204:
?LOGIN CCA D0101500
*** M204.0347: PASSWORD
?########
*** M204.0353: CCA D0101500 LOGIN 85 JUL 18 15:18
*** M204.0131: CHECKPOINT COMPLETED ON 85.199 15:09:29.75
Opening a file
The user opens the CLIENTS file:
?OPENC CLIENTS
*** M204.0620: FILE CLIENTS OPENED
Displaying a procedure
The user displays the procedures in the file:
?DISPLAY LIST
CONTRIB
To Next Page
Loading...