Rocket 204 - Output Page Buffer Settings; Page Header Formats

48 Rocket Model 204 Terminal User’s Guide
IBM 3270 terminals (IODEV = 11)
parameters. The user can reset INCCC and OUTCCC to override the default
values established by the MODEL parameter.
Output page buffer settings
The MODEL parameter is reset only if the size of the output page buffer
(LOUTPB) is large enough to hold the new screen size. The minimum LOUTPB
settings are listed in Table 4-3.
Page header formats
HDRCTL consists of a series of switches that control the formatting of pages
transmitted to the terminal. Each switch can be set independently of the others.
HDRCTL can be reset to the following values for 3270 terminals, but is not
usually reset:
Table 4-2. Valid MODEL settings for CICS 3270s
MODEL INMRL INCCC OUTMRL OUTCCC 3270 terminal type
1 78 78 80 80 Model 1
2 78 78 80 80 Model 2
3 78 78 80 80 Model 3
4 78 78 80 80 Model 4
5 130 130 132 132 Model 5
Table 4-3. Minimum LOUTPB settings
MODEL LOUTPB
01170
11170
22130
32770
43650
53774
0 Normal headers (system header showing date, time, and page number)
1 Suppress header 0 (system header showing date, time, and page number)
2 Suppress the blank line that normally follows header 0 for nonrequest
output