Rocket 204 - Output Page Buffer Settings; TERMOPT Parameter

SNA Communications Server Terminal 39
IBM 3270 terminals (IODEV = 7)
established by the MODEL parameter. The new settings remain in effect for the
thread until the user logs out.
Output page buffer settings
Note: MODEL is reset only if the size of the output page buffer (LOUTPB) is
large enough to hold the new screen size. The minimum LOUTPB settings are:
TERMOPT parameter
TERMOPT consists of a series of switches that can be set independently and
can be reset to the following values for 3270s (options can be summed):
Table 3-2. Valid MODEL settings for SNA Communications Server 3270s
MODEL INMRL INCCC OUTMRL OUTCCC OUTLPP 3270 terminal type
1 787880 80 11 Model 1
2 787880 80 23 Model 2
3 787880 80 31 Model 3
4 787880 80 42 Model 4
5 130 130 132 132 26 Model 5
MODEL LOUTPB
01170
11170
2 2130
3 2770
4 3650
5 3774
0 SNA Communications Server input exception causes soft restart of user.
1 No soft restart of user.
2 Request exception response only (no definite response).
64 String ’LOGON’ is placed before the first logical line of the SNA
Communications Server LOGMSG.