CMS Terminal Interface 69
Invoking and disconnecting from the CMS terminal interface
[USERID userid | CHANNEL channel | DISCONN string
|
SUBSET string | CMS filename]
[LOGIN] [NOLOGIN]
[DCSS] [NUCEXT] [UAREA]
[ONLINE] [IFDIAL]
[VMCF]] [)]
M204 EXEC options
The M204 EXEC options have the following meanings:
This option... Specifies...
LINE or DISPLAY Mode in which the communication is to be performed. LINE
represents line mode and DISPLAY represents full-screen
mode. The user can select LINE or DISPLAY, but not both.
LINE is the default for all terminals except 3270 terminals;
DISPLAY is the default for 3270 terminals. If DISPLAY is the
default and a CHANNEL option is not specified, an
unsuccessful connection attempt results in an automatic
attempt to connect in LINE mode.
USERID userid User ID of the virtual machine in which the Model 204
program to be accessed is executing. If userid is specified
as an asterisk (*), Model 204 is invoked in single-user mode.
CHANNEL channel Name of the channel (1-8 characters) to which the
connection is desired. If the IUCV interface is used, a
channel name of M204VMFS must be specified for IODEV
41; a channel name of M204VMIO must be specified for
IODEV 39.
Note: If the CHANNEL option is used, a mode (either LINE or
DISPLAY) also must be specified.
DISCONN string Character string that is the Model 204 disconnect sequence.
If this string is entered, a DISCONNECT command is
transmitted to Model 204. The DISCONN option is ignored if
Model 204 is invoked in single-user mode.
To Next Page
Loading...