52 Rocket Model 204 Terminal User’s Guide
Teletypes (IODEV = 29)
Because the pause and cancel capability is activated at the end of a page, be
sure not to set the OUTLPP (number of lines per page) parameter to zero
unless you want suppressed pausing and production of a header on the new
page. If OUTLPP = 0, there is no logical end-of-page, and the interface never
executes the pause.
The attention key facility is not available on Teletypes for the CICS interface.
Pause mode is the only way to control requests that provide more output than
desired.
To Next Page
Loading...