_____________________________________________________________________________________________
Subject to change without notice. 27
How to disassemble/dismantle
the machine
The machine has to be disassembled and dismantled by an
authorized technician.
Disassembling of the machine:
Operations to be effected with machine in working conditions at
operating temperature.
1. Place a recipient (with insulated grip) under the hot water wand (A-1).
2. Open the hot water valve (A-4) and let hot water flow in the recipient.
3. When no more hot water comes out, close the hot water valve (A-4).
4. Put on/off switch (A-12) to position “0” (machine off).
5. Unplug the machine from the electrical mains.
Operations to be effected with machine switched off and cooled down to
room temperature.
1. Empty the fresh water reservoir and clean it carefully before replacing
it back into the machine.
2. Make sure that the lever (A-7) is completely down.
3. Store the machine in a safe, dry place.
To Next Page
Loading...
