RocketFish RF-RBUSB User Manual

9
RF-RBUSB
Wireless sender/receiver (front panel)
# Feature Description
1
Standby indicator Turns red when the wireless sender/receiver is in standby mode.
2
Power/Join
button
Press to turn the wireless sender/receiver on. Press and hold to initiate joining.
Press again to go to standby mode. When you connect the AC power adapter,
the device turns on automatically.
3
Power/Join
indicator
Lights blue when the HUB STATUS switch is set to DISABLE.
Lights green when the HUB STATUS switch is set to ENABLE.
The indicator will turn solid when it is joined in a network, if the device is not in
a network, the indicator blinks slowly. When the device is put in joining mode,
the indicator blinks rapidly. See “Establishing communication” on page 21 for
more information.
4
Sender mode
indicator
Turns blue when sending audio.
Note: This indicator will light automatically when a 3.5 mm connector or a USB
cable is attached to the device (the device senses the cable connection).
RF-RBUSB_11-0204_MAN_V1.fm Page 9 Monday, May 2, 2011 8:04 AM

RocketFish RF-RBUSB Specifications

General

Brand	RocketFish
Model	RF-RBUSB
Category	Receiver
Language	English