21
Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
STEP 13 - Adjusting the tilt
• To increase or decrease the tilt tension, turn the adjustment knob on the side of the arm assembly.
For customer service, call: 800-620-2790 (U.S./Canada markets)
Increase
If TV weight exceeds product’s
factory setting, it won’t stay up
when raised. To prevent TV from
sagging downward, increase
tension setting.
Decrease
If TV weight is lower than
product’s factory setting, it won’t
stay down when lowered. To
prevent TV from drifting upward,
decrease tension setting.
Adjusting the factory-set tension
RF-TVMP40_13-0238_MAN_V1_ENG.fm Page 21 Monday, April 15, 2013 1:26 PM
To Next Page
Loading...
Need help?
General
