RocketFish RF-WHTIB-A User Manual

11
RF-WHTIB-A
Connecting the wireless receiver
Connecting the wireless receiver to your rear
speakers
To connect the rear speakers to the wireless receiver:
1 Connect the right speaker to the right speaker terminals of
the wireless receiver, and the left speaker to the left speaker
terminals.
2 If the speakers have wires instead of terminals, connect the
positive (+) wire from the right speaker to the red (+)
terminal for the right speaker on the wireless receiver and
the negative (-) wire from the right speaker to the black (-)
terminal for the right speaker on the wireless receiver.
3 Connect the left speaker the same way.
Notes:
For speaker wires that have proprietary connectors, you may
strip the end of the wires to allow connection to the wireless
receiver. However, check with the speaker manufacturer before
doing this, as it may void the warranty.
Make sure that the exposed tips of each speaker wire do not
touch each other, and that they are fully inserted into the
terminals.
100-240V~50/60Hz
Left rear
speaker
Right rear
speaker
RF-WHTIB_13-0050_MAN_V1_ENG.fm Page 11 Tuesday, March 26, 2013 11:51 AM

RocketFish RF-WHTIB-A Specifications

General

Brand	RocketFish
Model	RF-WHTIB-A
Category	Speakers
Language	English