Do you have a question about the Rockville Phenom RXA-F1 and is the answer not in the manual?
Channels | 4 |
---|---|
Minimum THD at RMS Output | <0.05% |
Input Sensitivity | 0.2V - 6V |
Fuse Rating | 40A x 2 |
Phase Shift | 0-180 degrees |
S/N Ratio | >90dB |
Frequency Response | 10Hz |
Damping Factor | >200 |
Variable Low Pass Filter | 50Hz |
Bass Boost | 0dB |
Subsonic Filter | 15Hz - 50Hz |
Use of amplifier at high volumes may cause permanent hearing damage.
IC controlled circuit monitors conditions, protecting the amplifier from damage.
Details thermal, input overload, speaker short, and DC offset protection.
Detailed technical specifications for the RXH-F5 amplifier.
Detailed technical specifications for the RXA-F2 amplifier.
Detailed technical specifications for the RXA-F1 amplifier.
Detailed technical specifications for the RXA-T1 amplifier.
Detailed technical specifications for the RXA-T2 amplifier.
Detailed technical specifications for the RXD-M5 amplifier.
Detailed technical specifications for the RXD-M4 amplifier.
Detailed technical specifications for the RXD-M3 amplifier.
Detailed technical specifications for the RXD-M2 amplifier.
Detailed technical specifications for the RXD-M1 amplifier.