Rockville KRYPTON Series User Manual

Who reads manuals?
Instead, go to vimeo.com/showcase/6761895 or scan
the QR code and watch a short informational video
concerning set-up and usage.
If you like to read though, we won’t stop you LOL!
Isn’t it good to have options? With Rockville we offer options.
Missing items? If you ordered a bundle that includes more than one product and you are missing part of your bundle then it just means your
order shipped from two different warehouses. You will receive the remaining items very soon. If you have any concerns or inquiries, feel free to
call our customer support center at 646-758-0144, Monday through Thursday, 9am to 10pm EST, and Fridays, 9am to 3pm EST.
ATTENTION: WATCH VIDEO BEFORE FIRST USE!
KRYPTON Series
CLASS AB 2-OHM STABLE MARINE AMPLIFIERS
OWNER’S MANUAL

Rockville KRYPTON Series Specifications

General

Signal-to-Noise Ratio	>90dB
Input Impedance	10K Ohms
Low Pass Crossover	50Hz - 250Hz
Phase Shift	0 - 180 Degrees
Input Sensitivity	200mV - 6V
Protection	Thermal, Overload, Short Circuit

Summary

Introduction

Important Safety Instructions

Essential safety guidelines and precautions for operating the amplifier and vessel.

Installation

Installation Basics and Mounting

Wiring

Wiring Preparation and Connections

Detailed steps for connecting power, ground, and remote wires to the amplifier.

Wiring Best Practices

Wire Stripping and Terminal Connections

Settings

System Adjustment and Gain Setup

Guide to setting crossover points, input sensitivity (gain), and basic equalization.

Electronic Crossover and Filtering

Input Configurations

2-Channel Input Setup

4-Channel Input Setup

Output Configurations

4-Channel Amp in 4-Channel Mode

4-Channel Amp in 3-Channel Mode

4-Channel Amp in 2-Channel Bridged Mode

Specifications

KRYPTON MF3 Specifications

KRYPTON MF4 Specifications

Detailed power output, filter ranges, THD, S/N ratio, and dimensions for MF4 model.

Woofer Wiring Guide

SVC Woofer Configurations

DVC Woofer Configurations

Troubleshooting

Amp Protect Mode Issues

Causes and solutions for the amplifier entering protect mode, including short circuits and thermal issues.

Power and Sound Issues

Resolving problems like the amp not powering on or having no sound output.

Clipping and Impedance Problems

Diagnosing and fixing amplifier clipping, often related to speaker impedance or gain settings.

Distortion and Noise Issues

Addressing distortion, background noise, crackling, or hissing from speakers.

Low Sound and Fuse Issues

Solutions for low audio output and persistent main/distribution block fuse blowing.

Fuse Blowing and Overheating

Power Off and Channel Issues