Need help?Do you have a question about the Rockville Phenom RXD-M0 and is the answer not in the manual?
General| Minimum THD at Rated Power | <1% |
|---|---|
| Damping Factor | >150 @ 100Hz |
| Input Impedance | 10K Ohms |
| Subsonic Filter | 10Hz - 50Hz |
| LFP | 50Hz - 250Hz |
| Bass Boost Frequency | 45Hz |
| Low Pass Crossover | 50Hz - 250Hz |
| Peak Power Output @ 4 Ohms | 2000 Watts |
| RMS Power Output @ 2 Ohms | 1500 Watts |
| RMS Power Output @ 1 Ohm | 2000 Watts |
| Peak Power Output @ 1 Ohm | 4000 Watts |
| Frequency Response | 10Hz - 35kHz |
| Input Sensitivity | 0.2V - 6V |
| Bass Boost | 0dB - 18dB |
| Operating Voltage | 16V |
| RMS Power Output @ 4 Ohms | 1000 Watts x 1 Channel @ 1% THD |
| Peak Power Output @ 2 Ohms | 3000 Watts x 1 Channel |
IC controlled circuitry monitoring and protecting the amplifier.
Proprietary power supply using HexFET devices for high speed switching.
Utilizes Japanese studio-grade, high current Bi-Polar audio transistors.
Automatic rail voltage adjustment for peak situations and damping factor.
Safety precautions, wiring, and mounting guidelines for installation.
Doubling power output by bridging amplifiers.
Detailed specs for RXH-F5 (5-channel) and RXA-F2 (4-channel).
Detailed specs for RXA-F1 and RXA-T1 amplifiers.
Detailed specs for RXA-T2 and RXD-M5 amplifiers.
Detailed specs for RXD-M4 and RXD-M3 amplifiers.
Detailed specs for RXD-M2 and RXD-M1 amplifiers.
Detailed specs for the RXD-M0 amplifier.
To Next Page