3. See illustration below as to position of microphones when mounted in stand.
Cardioid polar patter microphones should always be at a 90 degree angle to the axis of
the stage monitor. Hyper Cardioid polar pattern microphones should be positioned at
an acute angle to the sage monitor.
You may choose to add a feedback eliminating processor to your system for additional
exibility on stage.
There is really only one volume control on the RPG BT V2 unit, that is the knob marked MAS-
TER.
The Mic In level control is a matching device to match the preamp voltages of items such
as microphones and guitars or other musical instruments with your RPG BT V2 unit. Never
turn it up to maximum unless indicated by the instructions below. With a properly matched
signal your system will produce less distortion, be subject to less feedback, and will pro-
duce louder, cleaner and clearer sound. Use the Master control as your volume once all
inputs are matched properly. Your RPG BT V2 features a CLIP LED indicator to help you
set and match your components. Please be sure to read all set up instructions so your RPG
BT V2 sounds its best.
A Word About System Volume Controls and Gains.
Cardioid Polar Patter Hyper Cardioid Polar Patter
To Next Page
Loading...
Need help?
General