Rockville RPG12BT V2 User Manual

It is best practice to set your input level controls (gains) in this manner shown below.
1. Unplug all inputs except for the one you wish to set the
gain for. In this instance, the Line In ¼˝ input.
2. Set the volume of the external stereo
signal source (mixer, keyboard, electronic
drums, CD player, DVD music player, smart
phone, MP3 player, etc.) to 60%. If using a
device with RCA outputs, use an RCA to
¼˝ TRS cable.
3. Set the Master volume to 75%.
4. Slowly turn up the level on the selected
input (in this case, the Level controller). As
soon as the clip indicator LED goes on or
you hear any distortion – turn it down one or
two notches.
Please note: If you are using the RCA AUX
inputs, perform this step with the AUX/MP3
Volume controller.
Setting Level Controls
3
2
4
1
POWER
CLIP

Rockville RPG12BT V2 Specifications

General

Brand	Rockville
Model	RPG12BT V2
Category	Speakers
Language	English