Rockwell Automation Allen-Bradley 1756-EN2T Installation Instructions

Rockwell Automation Publication ENET-IN002H-EN-P - August 2017 31
Install a 1768 EtherNet/IP Communication Module Chapter 2
1. Flip the switch to the OFF position.
2. Open the DIN rail latches of the communication module and the module
directly to the left of communication module.
3. Slide the communication module and other modules to the right.

Rockwell Automation Allen-Bradley 1756-EN2T Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley 1756-EN2T
Category	Network Hardware
Language	English