To Next PageTo Next Page
Need help?Do you have a question about the Rockwell Automation Allen-Bradley ControlLogix 1756-EN2F and is the answer not in the manual?
General| Product Type | Ethernet Communication Module |
|---|---|
| Series | ControlLogix |
| Catalog Number | 1756-EN2F |
| Communication Protocol | Ethernet/IP |
| Ports | 2 |
| Port Type | RJ45 |
| Network Speed | 10/100 Mbps |
| Relative Humidity | 5 to 95% non-condensing |
| Mounting Type | Chassis |
| Power Supply | Backplane |
| Operating Temperature | 0 to 60 °C |
| Storage Temperature | -40 to 85 °C |
| Shock | 30 g |
| Certifications | CE, UL |
Manual's purpose and scope.
Lists related documents and resources for further information.
Introduces EtherNet/IP networks and their role in automation.
Provides detailed technical specifications for EtherNet/IP network devices.
Explains how to use SNMP for device management and monitoring.
Describes features that match devices to project configurations to prevent errors.
Explains the mode that prevents configuration changes on the module.
Covers the use of Secure Digital cards for storing configuration data.
Explains the CIP Security standard for secure data transport on EtherNet/IP networks.
Describes the PRP standard for high-availability Ethernet networks.
Details the DLR protocol for fault tolerance in ring-based networks.
Outlines the requirements and procedures for setting the IP address.
Explains how to use rotary switches to configure the module's IP address.
Provides instructions to restore the module's IP settings to factory defaults.
Discusses specific IP address settings for configuring redundant adapter pairs.
Covers essential rules and details for designing redundant adapter systems.
Explains the conditions and process for switching control between redundant adapters.
Provides a step-by-step guide to configure a redundant adapter pair.
Addresses network design aspects for optimal redundant adapter performance.
Provides an overview of status indicators on network devices.
Explains the status indicators for single-port EtherNet/IP modules.
Explains the status indicators for dual-port EtherNet/IP modules.
Guides users on how to access and navigate the diagnostic web pages.
