To Next PageTo Next Page
Need help?Do you have a question about the Rockwell Automation Allen-Bradley ControlLogix EtherNet/IP and is the answer not in the manual?
General| Product Family | ControlLogix |
|---|---|
| Network Protocol | EtherNet/IP |
| Connector Type | RJ45 |
| Supported I/O Modules | All ControlLogix I/O modules |
| Processor Options | Compatible with ControlLogix processors |
| Communication Speed | 10/100 Mbps, Gigabit (depending on module) |
| Number of Ports | 1 or 2 (depending on module) |
| Protocols | EtherNet/IP, TCP/IP, UDP, DHCP, HTTP |
| Power Supply | Backplane power (5V DC, 24V DC depending on module) |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Mounting Type | ControlLogix chassis slot |
| Backplane | ControlLogix backplane |
| IP Address Assignment | DHCP, BootP, or Static IP |
| Network Topology | Star, linear |
| Certifications | CE, UL, cUL |
| Data Rates | 10/100/1000 Mbps |
Reduces device-use errors by comparing project configuration to installed device attributes.
Prevents configuration changes on the module when enabled, enhancing operational security.
Supports storing configuration data, such as IP addresses, directly on the module.
Implements secure data transport across EtherNet/IP networks using encryption for data integrity.
Details prerequisites and conditions necessary for configuring the module's IP address.
Step-by-step guide on using the module's rotary switches for IP address configuration.
