Rockwell Automation Allen-Bradley ControlLogix EtherNet/IP User Manual

14 Rockwell Automation Publication 1756-UM004A-EN-P - March 2019
Chapter 1 ControlLogix EtherNet/IP Network Device Overview
Enable/Disable Secure Digital Card
To enable or disable the SD card, use one of the following methods.
• Using a CIP Generic Message
– To enable, set Attribute 4 (‘SOCKET DISABLED’) to ‘0’ (‘False’) of
Removable Media Socket Object instance (0x3A4, 932 decimal)
– To disable, set Attribute 4 (‘SOCKET DISABLED’) to ‘1’ (‘True’)
of Removable Media Socket Object instance (0x3A4, 932 decimal).
• Enable/Disable using the Add-on Profile.
The adapter supports the use of a 1784-SD1 (1 GB) and 1784-SD2 (2 GB)
card. You can use third-party SD cards with the controller. You can use SD
cards with as much as 32 GB of memory.
If you use an SD card other than those cards that are available from
Rockwell Automation, unexpected results can occur. For example, you can
experience data corruption or data loss.
SD cards that are not provided by Rockwell Automation can have different
industrial, environmental, and certification ratings as those cards that are
available from Rockwell Automation. These cards can have difficulty with
survival in the same industrial environments as the industrially rated versions
available from Rockwell Automation.
IMPORTANT Rockwell Automation does not test the use of third-party SD cards with the
device.

Rockwell Automation Allen-Bradley ControlLogix EtherNet/IP Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley ControlLogix EtherNet/IP
Category	Network Hardware
Language	English