To Next PageTo Next Page
Need help?Do you have a question about the Rockwell Automation Allen-Bradley 1756-EN2T and is the answer not in the manual?
General| Product Type | Ethernet Communication Module |
|---|---|
| Series | ControlLogix |
| Protocol | Ethernet/IP |
| Ports | 2 |
| Data Rate | 10/100 Mbps |
| Operating Temperature | 0 to 60 °C (32 to 140 °F) |
| Backplane Current @ 5VDC | 800 mA |
| Backplane Current @ 24VDC | 0 mA |
| Power Dissipation | 4.0 W |
| Certifications | CE |
| Power Supply | Backplane powered |
Details technical specifications, including media, communication rates, and connection types.
Explains the security feature that prevents unauthorized configuration changes to the module.
Details the CIP Security standard for secure data transport and device authentication.
Describes the Device Level Ring protocol for fault-tolerant network topologies.
Provides procedures and requirements for assigning an IP address to the EtherNet/IP module.
Step-by-step instructions for setting up and configuring a 1756-EN4TR redundant adapter pair.
Methods to disable or enable specific Ethernet ports for enhanced security.
Procedures to disable CIP Security ports to enhance network protection.
