Need help?Do you have a question about the Rockwell Automation Allen-Bradley 5094-IB16S and is the answer not in the manual?
General| Brand | Rockwell Automation |
|---|---|
| Model | Allen-Bradley 5094-IB16S |
| Category | I/O Systems |
| Language | English |
Details compatibility requirements for FLEX 5000 I/O modules with Logix 5000 controllers and software versions.
Provides options and best practices to secure the FLEX 5000 I/O module and system access.
Outlines the process of creating a Logix Designer project and transferring configuration data.
Details restrictions on operations that could disrupt module operation based on operating mode.
Highlights safety module features, type approval, certification, and suitability for specific applications.
Explains safety I/O module modes and their effect on safety application suitability levels.
Emphasizes using appropriate components and assessing conformity for safety standards.
Defines the safe states for safety outputs (OFF) and safety input data (OFF).
Explains how configuration signatures and ownership ensure module integrity and prevent errors.
Allows configuring individual output points to specific states during Program or Fault modes.
Details how to configure output module behavior when a connection fault occurs.
Describes how outputs behave based on the Fault Mode parameter when a connection breaks.
Helps prevent output damage from excessive current by detecting short circuits or overcurrents.
Protects outputs from overheating due to excessive loads, automatically turning them off.
Describes features of FLEX 5000 I/O safety input modules (5094-IB16S, 5094-IB16SXT).
Details suitability levels for safety applications based on SIL, PL, and Category standards.
Explains how safety input modules connect to safety devices and their configuration options.
Describes using test outputs with safety inputs for fault detection and configuration.
Explains module-level configuration for latching faults until reset via output tag.
Describes features specific to FLEX 5000 I/O safety output modules (5094-OB16S, 5094-OB16SXT).
Explains how safety output modules connect to safety devices and their configuration options.
Configures safety output channels for continuous testing (Safety Mode) or momentary power removal (Pulse Test).
Describes single-channel operation for safety output modules and fault detection.
Explains dual-channel operation for safety output modules, where channels function as pairs.
Explains module-level configuration for latching faults until reset via output tag.
Describes how safety modules report fault and status data via module tags in Logix Designer.
Explains how to automatically detect and add connected FLEX 5000 I/O modules to a project.
Details the manual method for adding FLEX 5000 I/O modules to a Logix Designer project.
Details configuration categories specific to the 5094-IB16 module.
Guides on adding new safety I/O modules to an offline Logix Designer project.
Introduces common categories for configuring FLEX 5000 safety I/O modules in Logix Designer.
Allows setting RPI rates and Connection Reaction Time Limit configurations for safety modules.
Explains how to use Logix Designer for troubleshooting, including warning signals and fault info.
Lists calculated safety data for 5094-IB16S/SXT modules, including PFD, PFH, and MTTF values.
Lists calculated safety data for 5094-OB16S/SXT modules, including PFD, PFH, and MTTF values.
To Next Page