Installation Instructions
Original Instructions
POINT I/O 4 Channel High Density Current Input Modules
Catalog Numbers 1734-IE4C, 1734-IE4CK, Series C
Catalog numbers with the suffix ‘K’ are conformal coated and their specifications are the same as non-conformal coated catalogs.
Summary of Changes
This publication contains the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes.
Topic Page
Summary of Changes 1
Before You Begin 5
Install the Mounting Base 6
Install the Module 7
Install the Removable Terminal Block 7
Remove a Mounting Base 8
Wire the Module 9
Communicate with Your Module 10
Interpret Status Indicators 10
Specifications 11
Topic Page
Updated UK and European Hazardous Location Approval 4
Updated IEC Hazardous Location Approval 4
Updated Special Conditions for Safe Use 4
Updated General Specifications 12
Updated Environmental Specifications 13
Updated Certifications 13, 14
To Next Page
Need help?
General
