Need help?Do you have a question about the Rockwell Automation Allen-Bradley 5094-OB16 and is the answer not in the manual?
General| Manufacturer | Rockwell Automation |
|---|---|
| Brand | Allen-Bradley |
| Product Type | Digital Output Module |
| Catalog Number | 5094-OB16 |
| Number of Outputs | 16 |
| Voltage Rating | 24V DC |
| Operating Voltage | 24V DC |
| Maximum Current per Point | 0.5 A |
| Maximum Current per Module | 8 A |
| Enclosure Type Rating | None (open-style) |
| Output Type | Sourcing |
| Operating Voltage Range | 10-30V DC |
| Isolation Voltage | 50V AC/DC |
| Wire Size | 0.2…2.5 mm² (24…14 AWG) solid or stranded copper wire |
| Connection Type | Removable terminal block |
| Operating Temperature | -20°C to 60°C |
| Certifications | cULus, CE, RCM |
Covers essential safety warnings, hazard alerts, and precautions for using the product.
Details compatibility requirements between Logix 5000 controllers, software, and FLEX 5000 I/O modules.
Details the components of a FLEX 5000 I/O system and its power requirements.
Guides users on creating and configuring FLEX 5000 I/O modules using the Logix Designer application.
Highlights key considerations for FLEX 5000 safety I/O modules, including suitability levels and controller compatibility.
Lists critical safety precautions for the proper use and installation of FLEX 5000 safety I/O modules.
Details No Load Detection, Short-Circuit Protection, and Thermal Shutoff for output modules.
Describes suitability levels (SIL, PL, Cat) for safety input/output modules based on conditions.
Describes safety output modes, surge capability, and the process for safety output fault reset.
Outlines prerequisite tasks and methods for adding FLEX 5000 I/O modules to a Logix Designer project.
Explains how to navigate and edit module configuration parameters using categories.
Covers prerequisites for configuring safety modules and the process of creating new modules.
Details module definition parameters and connection settings for safety modules.
Provides guidance on replacing safety modules, considering safety network numbers (SNN) and device IDs.
Details the process of manually setting the SNN for initial download integrity.
Explains how to reset module ownership and configuration to its out-of-box state.
To Next Page