Installation Instructions
Original Instructions
PanelView 800 HMI Terminals
Catalog Numbers 2711R-T4T, 2711R-T7T, 2711R-T10T
Summary of Changes
This publication contains the following new or updated information. This list includes substantive updates only
and is not intended to reflect all changes. Translated versions are not always available for each revision.
About This Publication
This document provides instructions on how to install, wire, ground, and troubleshoot PanelView™ 800 terminals.
It does not provide information on how to configure or run applications on the following devices: 2711R-T4T,
2711R-T7T, and 2711R-T10T.
Topic Page
Summary of Changes 1
About This Publication 1
Environment and Enclosure 2
Preventing Electrostatic Discharge 2
North American Hazardous Location Approval 3
Catalog Number Explanation 4
About the Terminals 4
Parts List 6
Install the Terminal 7
Product Dimensions 10
Choose a Power Supply 12
Connect Devices 15
Troubleshooting 16
Battery Replacement 16
Specifications 18
Additional Resources 20
Topic Page
Updated template Throughout
Updated power consumption specification 13, 18
Updated Environmental Specifications 19
Updated Certifications 20
To Next Page
General
