3-4 Programming and Parameters
Display Group (continued)
d006 [Drive Status]
Related Parameter(s): A095
Present operating condition of the drive.
Values Default Read Only
Min/Max: 0/1
Display: 1
1 = Condition True, 0 = Condition False
Running Bit 0
Forward Bit 1
Accelerating Bit 2
Decelerating Bit 3
d007 [Fault 1 Code]
d008 [Fault 2 Code]
d009 [Fault 3 Code]
A code that represents a drive fault. The codes will appear in these parameters in the order they occur
(d007 [Fault 1 Code] = the most recent fault). Repetitive faults will only be recorded once.
Refer to Chapter 4 for fault code descriptions.
Values Default Read Only
Min/Max: F2/F122
Display: F1
32 bit parameter.
d010 [Process Display]
Related Parameter(s): d001, A099
The output frequency scaled by A099 [Process Factor].
Values Default Read Only
Min/Max: 0.00/9999
Display: 0.01 – 1
32
Output
Freq
Process
Factor
Process
Display
=
x
userman.book Page 4 Friday, June 21, 2002 2:48 PM
To Next Page
Loading...
Need help?
General
