Rockwell Automation Publication 6300P-UM001B-EN-P - March 2021 31
Chapter 4 Configure, Restore, and Update System Settings
7. In Format Flash Drive, select FAT32 from the file system pull-down
menu.
8. Click Start to format the drive to FAT32.
A confirmation box appears after formatting is completed; click OK.
Download the UEFI Update Files
To update the UEFI, perform the following steps.
1. Access the Rockwell Automation PCDC website at:
https://compatibility.rockwellautomation.com/Pages/home.aspx
.
2. On the home page, click Find Downloads.
3. On the Find Downloads page, use your computer model as the search
criteria.
4. To find your UEFI file, follow the instructions on the PCDC site.
5. Download the UEFI file to the FAT32-formatted USB drive connected to
your computer.
To update the UEFI on VersaView 6300P panel PCs, perform the following
steps.
1. Verify that the following files are on your USB drive:
•ShellFlash64.efi
•AfuEfix64.efi
• UEFI upgrade (.bin) file
2. Start or restart your computer.
3. During POST, press F2 to access the set-up utility.
4. Use the right (6) arrow to toggle over to the Advanced tab.
5. On Advanced, use the down (2) arrow to toggle down and select
PCI-FW Configuration, and then press Enter.
IMPORTANT To perform these steps, an external mouse and keyboard must be connected to
the computer.
You must be registered with the Rockwell Automation PCDC website to download
files.
You must accept a User Agreement before files can be downloaded.
To Next Page
Loading...