EasyManua.ls Logo

Rockwell Automation PanelView Plus Series

Rockwell Automation PanelView Plus Series
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
227Publication 2711P-UM001I-EN-P - December 2008 227
Chapter
10
Maintenance
Chapter Objectives
This chapter provides information on the following topics:
Clean the display
Disposal information
Clean the Display Window
Use a protective antiglare overlay for easier cleaning of the display
window.
Follow these steps to clean the display window.
1. Disconnect power from the terminal at the power source.
2. Use a clean sponge or soft cloth with a mild soap or detergent to
clean the display.
3. Dry the display with a chamois or moist cellulose sponge to
avoid water spots.
Remove fresh paint splashes and grease before drying by rubbing
lightly with isopropyl alcohol (70% concentration). Afterward, wash
using a mild soap or detergent. Rinse with clean water.
ATTENTION
Use of abrasive cleaners or solvents may damage the display.
Do not scrub or use brushes.

Table of Contents

Other manuals for Rockwell Automation PanelView Plus Series

Related product manuals